UMI Performance 82-92 GM F-Body Tunnel Mounted Trq. Arm Fits T5 TH350- No Loop - Red

This torque arm set-up is designed to remove the front mounting point of the torque arm off the transmission, protecting the tail shaft from damage. This torque arm is supplied with pivot brackets that allow (2) settings to allow easy instant center adjustments.

By simply moving the torque arm into the next location you can automatically change the instant center point of the vehicle. This is very crucial on low to mid horse-power cars and can easily lower 60-foot times. This set-up bolts to existing floor pan holes using 0.188" thick mild steel CNC machined mounting plates and metric grade 10.9 hardware.

The complete cross brace is constructed of 0.120" thick rectangular tubing and attaches to the torque arm using 0.250" thick mild steel mounting pivot plates with Grade 8 hardware. The torque arm is attached to the supplied cross brace using an Energy Suspension polyurethane bushing set-up on both the supplied cross brace and torque arm.

Polyurethane was chosen as a mounting point to keep road noise at a minimum and eliminate unwanted "clunks" found with other set-ups available. The grease-able polyurethane bushings absorb road irregularities and protect noise from entering the passenger compartment.

The rear mounting points feature 0.375" thick CNC machined mounting plates and are appropriately drilled to fit your stock rear as well as aftermarket 12-Bolt and 9" Rear-end housings. This set-up requires no welding or drilling and can be installed with basic hand tools; this is a complete bolt-in design!

This torque arm is specifically designed to work with a TH350 transmission in an 82-92 Camaro or Firebird. It includes a transmission crossmember and a shorter, adjustable torque arm. The setup allows for a 100% bolt-in installation for the TH350 transmission, as well as the factory T5 5-speed transmission.

The torque arm setup removes the front mounting point from the transmission tail shaft, protecting the transmission from damage. It comes with pivot brackets for easy instant center adjustments, which can improve vehicle performance, particularly for low to mid horsepower cars. The setup is easy to install with basic hand tools, as it bolts to existing floor pan holes.

The construction is robust, with DOM seamless steel tubing, TIG welded chrome moly tube adaptors, and CNC machined mounting plates. The rear mounting points are compatible with stock, as well as aftermarket, rear-end housings. A hardware kit is recommended for certain rear-end designs to ensure proper fitment.